Previously known as Hobie's 'Fish Finder Installation size kit 3', the...

Kit for passing wires through the hull of a kayak. Contains 2 pass thru plugs...

Mountable holder for Hobie 8amp 12v battery as used for fish finders and Micro Power...

*Out of Stock* Hobie’s Fish Finder Install Kit (previously known as their...

  Small size RAM mount for Lowrance Elite, Mark and original Hook fish finder...

The RAM Flexible Transducer Arm Mount is designed to simplify external...

External transducer-mounting system for sit-on-top fishing kayaks.

The Large RAM Lowrance Elite mount is compatible with all Elite and Mark...

BerleyPro have developed a range of custom sun visors compatible with various...

Hardware required to fit a Lowrance Elite or Mark series transducer into a...

Set of male/female waterproof plugs with wires and 4 waterproof silicon filled wire...

Single pass through plug for feeding electrical wiring through kayak hulls

BerleyPro have developed a range of custom transducer cover plates compatible...

SLH have modified the Powertech MB3611 12v Battery charger to include a water...

Adaptor plate for mounting Humminbird transducers into Hobie kayak transducer...

Inline fuse holder with 3A fuse for use with all Lowrance sounder units. *Sold...

Designed in Australia by kayak anglers, the FPV-POWER batteries are ideal for...

Railblaza have released their new R-Lock Starport Extender to replace the...

Replacement cover plate for Lowrance Ready Hobie Mirage kayaks 

3-Way compatible thru-hull plug and grommet wiring kit, as used on 2016 model...

The RAM® Bond-A-Base™ is a flexible PVC mounting pad which allows the...

For mounting large size sounders or multiple device installation. 1.5" 'c'...

Hobie Lowrance Totalscan Ready Plate. Compatible with Lowrance TotalScan...

Transducer insulated foam pads for internal installations of Lowrance...

The RAM-B-202U-LO11 includes a 1" diameter rubber ball and inserts directly to...

Lowrance's HOOK2-4x with Bullet Transducer and GPS Plotter is the world’s...

The Railblaza Transducer Arm has been developed for  kayak anglers needing an...

Water resistant female connector with 5 metres of wiring for use in...

The BerleyPro BatterangBro battery holder is a tidy solution for storing FPV...

Male water resistant style plug with short lead (approx 200mm length) for...

HOOK2-5x with SplitShot Transducer and GPS Plotter offers simple menus, easy...

Wire loom with fuse holder and fuse. Used to run two devices off one battery...

The Hobie Rudder Ready Kit makes it possible to mount a fish finder transducer to your...

12v Battery Charger as used in Hobie Fish Finder Installation Kits. 

SLH have been installing fish finders onto kayaks ever since installing fish...

SLH use Trem tube clips to mount FPV Lithium Batteries to Hobie Mirage kayak...

Railblaza's new R-Lock Fish Finder Mount is designed to be compatible with...

The Railblaza Hook 2 adapter can be mounted to any Starport fitting to secure...