SLH use Trem tube clips to mount FPV Lithium Batteries to Hobie Mirage kayak mast receiver tubes, and now you can to! This is the simplest, smallest, lightest and least expensive method of mounting an FPV Lithium battery to your Hobie Mirage kayak.
- 2 x tube clips
- 2 x stainless screws
Fitting example shown below:
Installing the clips to the battery is simply a matter of screwing the clips into the corner holes of the battery. Each clip is screwed in by a single screw, which is strong enough to hold a 7 and 17AH battery to the tube. Although not required for installation, optionally you can also add a small blob of Marine Goop under the clip when mounting to secure the position so the clips do not pivot.
This is what they look like mounted to the kayak:
Easy Peezy Lemon Squeezy!
Note: if you'd rather mount your FPV battery within the 8" hatch, look at the BerleyPro Batterang FPV battery mount