Bixpy DIY Fin Adapter


In stock

SKU AT-INK-2101 Category Brand

If you own an inflatable kayak or stand up paddle board and are keen to get it motorized the DIY Fin Adapter for Inflatables will do the trick. Compatible with Bixpy K-1 & J-2 Motors

Bixpy DIY Fin Adapter for Inflatables

The DIY Fin Adapter for Inflatables is designed as a motor mounting solution for inflatable SUPs and kayaks that do not have a fin box / plate. Simply glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy Motor onto your newly installed fin box.

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat’s construction, please contact us and we’ll do our best to help

Bixpy DIY Fin Adapter


  • Inflatable Fin Box – Adapter
  • Bixpy Slide & Lock Fin Adapter
  • All hardware required

Additional Info:

  • Additional features: Easily attached to your Bixpy Motor
  • Compatible with Bixpy K-1 & J-2 Motors
  • Motor draft: 6″ (15 cm)
  • Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
  • Also see: J1 DIY Fin Adapter for Inflatables

Installation Guide: